Calibration and Self-test of SuperPro Programmers

Xeltek SuperPro programmers are factory calibrated and do not need periodic calibration. However, if the user require that all manufacturing equipment be certified every year or simply want to check whether the programmer is properly calibrated, then Xeltek will provide instructions to run a full calibration and hardware test.

Programming equipment that needs calibration should be sent back to Xeltek. Xeltek requires that all unit sent back for calibration to have a valid RMA number.

Request your RMA number at http://xeltek.rmaportal.com/ and an RMA number will be provided via email. The calibration fee is $100 and the certificate is valid for 2 years.